HMWPE of Kynar Cathodic Protection Cables


Model Number: Rolling Stock Cable
Insulation Material: EPR
Type: Medium Voltage
Application: Railway
Conductor Material: Copper
Jacket: High Molecular Weight Polyethylene
Number of Conductors: Cathodic Protection Cables
Sheath: CSM(chlorosulfonated polyethylene)
Insulation:: Polyvinylidene fluoride(KYNAR)
Jacket:: High Molecular Weight Polyethylene

Packaging & Delivery
Packaging Details:Packed in drums,cases or according to your requirement
Delivery Detail:Usually within 5-15 working days after the deposit

Rated Voltage:0.6/1kV and below

Type:HMWPE/KYNAR

Conducor Standard:Use annealed copper wire (IEC60228-2004)

Insulation: Polyvinylidene fluoride(KYNAR)

Used polyvinylidene fluoride(KYNAR)insulation material imported from US and its thickness should no less than stated nominal value. Its minimum value should no less than 90% of the normal requirement. Insulation should pass 6kv power frequency sparking test by 100%.

Jacket:High Molecular Weight Polyethylene

Use black high molecular weight polyethylene sheath material and its thickness should no less than stated nominal value,sheath thickness control according to nominal value,sheath thickness kindly see the following list.

Lettering Requirements: Can be customized to meet customer requirements. 

Applications:

Used for direct earth burial or water submerged cathodic protection installations.


Specification & Structure dimension                                                 
DescriptionConductorInsulationJacketOuter Diameter±1mmReference Weight
Sectional  AreaConductor Structure No. Conductor DiameterStandard Thickness (kynar)±0.5mmStandard Thickness(HMWPE0.5mm
mm2mmmmmmmmmmKg/Km
    HMWPE/KYNAR1*67/1.0330.61.47.088.6
1*107/1.374.10.61.48.1137.0
1*167/1.7050.61.69.6197.8
1*2519/1.296.50.61.711297.1

1.jpg